B.5.2.3.2 Power Saving - Image Access WideTEK 25 Operation Manual

B.5.2.3.2 Power Saving

Use the function Power Saving
Click on the link Power Saving.
The Energy Star guidelines define the default time until the device goes into stand-by to
be 15 minutes.
In stand-by mode its power consumption of the scanner is only 0.1 Watt.
Picture 89 shows the list of available values. The list starts with "5 minutes" and ends with
"4 hours". Four hours is the maximum time period defined through the Energy Star
guidelines.
Page 96
to set the time until the scanner goes into stand-by mode.
Picture 89: User Settings screen
Click on the
selection arrow
and select the
desired value
from the list.
Manual