Connecting To The Power Source - Image Access WideTEK 25 Operation Manual

A.10

Connecting to the Power Source

Before connecting the scanner to the electrical outlet check the following items:
Ensure the electrical outlet is in perfect condition and that it is
properly grounded.
Ensure that the electrical outlet is equipped with a fuse with the
proper capacity.
The electrical outlet must be near this device and must be easily
accessible.
Inspect the power cable and ensure that it is undamaged.
Use only the power cable delivered with the scanner.
Turn the device off before plugging or unplugging any cable.
All connectors are positioned at the right side of the back of the housing, seen from the
operator's position (i.e. from the front of the scanner).
Page 22 Manual