ENSONIQ DP/4 Musician's Manual page 90

74
Section 4 - Algorithms
05 - MultiTap 1 Regen
09 - MultiTap 2 Regen
13 - MultiTap 3 Regen
17 - MultiTap 4 Regen
Ranges: 00 to 99
These parameters determine the amount of signal that will be fed from the output back into the
input, increasing the number of repeats in the delays. A setting of 99 would offer an infinite delay.
06 - MultiTap 1 Pan
10 - MultiTap 2 Pan
14 - MultiTap 3 Pan
18 - MultiTap 4 Pan
Ranges: -99 to +99
These parameters determine the location of the four controllable delays in the stereo spectrum. A
value of -99 is panned far left, and +99 is far right.
19 - Regen Damping
Ranges: 00 to 99
Controls the cut off of a low pass filter on the feedback signal, which adjusts the amount of
damping to the feedback signals. The higher the number, the more the signals are dampened.
20 - Mod1 Source
21 - Mod1 Destination
22 - Mod1 Param Range Min
23 - Mod1 Param Range Max
24 - Mod2 Source
25 - Mod2 Destination
26 - Mod2 Param Range Min
27 - Mod2 Param Range Max
See the descriptions under the Algorithm Modulators, in the beginning of this section.
ENSONIQ DP/4 Musician's Manual