No Effect (Bypass Effect) - ENSONIQ DP/4 Musician's Manual

Section 4 - Algorithms
NO EFFECT (BYPASS EFFECT)
130
00 - No Effect will bypass the unit, providing no effect. Whether or not this utility algorithm
passes audio (bypass) or squelches it (kill) is controlled in the Edit/Config parameters and is
explained in more detail in Section 3 - Config Parameters.
The parameters available for this algorithm are:
01-Mix
Range: 00 to 99
Controls the mix of a dry signal with silence. In other words, this algorithm has two signals, one
that is silent, and a signal that is not. When this parameter is set to 00, you select the audible
signaL When set to 99, you select the silent signaL The Mix parameter for this algorithm could be
thought of as a reversed volume control.
02-Volume
Range: 00 to 99
Adjusts the volume of the dry external signal. 00 is silent and 99 is full volume.
03 - Mod1 Source
04 - Mod1 Destination
05 - Mod1 Param Range Min
06 - Mod1 Param Range Max
07 - Mod2 Source
08 - Mod2 Destination
09 - Mod2 Param Range Min
10 -
Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.
ENSONIQ DP/4 Musician's Manual