Unit Specific Parameters - ENSONIQ DP/4 Musician's Manual

Section 6 - System-MIDI Mode
Unit Specific Parameters
138
The first 35 System-MIDI parameters are the unit specific MIDI setup parameters. Each unit (A
B, C, D) and Config has seven MIDI setup parameters available. In this context only, the Config
may be considered as a "virtual unit" because it has its own set of MIDI parameters which allow
program changes to select config presets and bypass controllers to bypass all of the units together
as is the case when the Config button is toggled.
The following screen displays are all shown for unit A. The other units' screens are similar and
can be reached by pushing the respective unit buttons and then scrolling with the Right Arrow
button. The parameter numbers for the other units are listed following each of the descriptions.
00 - MIDI Channel
1=1
Chan=01
IS
Enabled
Range: 01 to 16
This parameter allows you to set the MIDI charmel to which the unit responds, if MIDI reception
is enabled for the unit.
This is:
parameter 00
parameter 07
parameter 14
parameter 21
parameter
28
01 - MIDI Enable
For:
Unit A
UnitB
UnitC
UnitD
Config
Range: Disabled or Enabled
This parameter allows the selected unit's MIDI reception to be enabled or disabled.
This is:
parameter 01
parameter 08
parameter 15
parameter 22
parameter 29
For:
Unit A
UnitB
UnitC
UnitD
Config
ENSONIQ DP/4 Musician's Manual
-