Parametric Eq - ENSONIQ DP/4 Musician's Manual

Section 4 - Algorithms
PARAMETRIC EQ
00 - Parametric EQ offers a minimum phase four band parametric EQ.
The parameters available for this algorithm are:
01-Mix
02-Volume
See the descriptions under the Mix and Volume Parameters, in the beginning of this section. For
this algorithm, we recommend a setting of 99.
03- Bass Fc
Range: 0 to 1000 Hz
This parameter sets the center of the low frequency parametric.
04 - Bass Gain (loShv)
Range: -48 to +24 dB
This parameter sets the amount of boost or cut applied to this low frequency parametric.
OS-Mid1 Fc
Range: 1 00 to 9999 Hz
This parameter sets the center of the mid frequency parametric.
06 - Mid1 Gain
Range: -48 to +24 dB
Sets the amount of boost or cut applied to this mid frequency parametric.
07-Mid10
Range: 01 to 18
This parameter is a bandwidth control that determines the width of the resonant peak at the
center frequency band. By raising the value you can produce a narrower bandwidth.
08-Mid2 Fc
09 - Mid2 Gain
10- Mid2 0
These three parameters are identical to the previous three parameters (05, 06 and 07), and are
used to control different bandwidths within the mid range.
11 - Treble Fc
Range: 01 to 16 KHz
This parameter sets the center frequency of the high frequency parametric.
12 - Treble Gain (HiShv)
Range: -48 to +24 dB
Sets the amount of boost or cut applied to this high frequency parametric.
13 -
EO
Input Level Attenuation
Range: -24 to +00 dB
This parameter allows you to adjust the input level trim to the EQs to eliminate the possibility of
clipping boosted signals.
14 - Mod1 Source
15 - Mod1 Destination
16 - Mod1 Param Range Min
17 - Mod1 Param Range Max
18 - Mod2 Source
19 - Mod2 Destination
20 - Mod2 Param Range Min
21 - Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.
ENSONIQ DP/4 Musician's Manual 127