ENSONIQ DP/4 Musician's Manual page 158

142
Section 6 - System-MIDI Mode
nr
UO
06 - Unit Bypass
Unit
MIDI
1=1
Bypass=
Pit.ch Bend
Range: various
This parameter allows you to choose the controller source which will function as a bypass switch
for the unit.
The available bypass controller sources are:
•
MIDI Pitch Bend
•
MIDI Note Number
•
MIDI Note Velocity
•
MIDI Aftertouch
•
DP / 4 Analog CV In
•
DP /4 Footswitch 1
•
DP /4 Ftsw1 Toggle
•
DP / 4 Footswitch 2
•
DP /4 Ftsw2 Toggle
•
MIDI Control #000 to #127
•
Turned Off
The same controller source can be used to modulate and bypass an effect. However, to avoid
unexpected side effects, the modulation and bypass functions should usually be assigned to
different controllers.
Note that MIDI Controllers used for bypass are only received on the DP / 4's Controller channel.
This is: For:
parameter 06 Unit A
parameter 13
UnitB
parameter 20 UnitC
parameter 27 UnitD
parameter 34 Config
ENSONIQ DP/4 Musician's Manual
-
~
--.
,-"'