System Global Parameters - ENSONIQ DP/4 Musician's Manual

Section 6 - System-MIDI Mode
System Global Parameters
There are some system global parameters (beginning with parameter 35) that can be reached by
pressing the SystemeMIDI button repeatedly. Parameter 35 is the first page of a sub-group. The
following system global parameters are available:
35 - Control Chan
Control
MIDI
.
lS
Chan=01
Enabled
••••••••••••••
:."
.......
;.
::
::".:;:
Range: 01 to 16
The first parameter on this page allows you to select the MIDI channel (01 through 16) on which
MIDI controller messages (modulation sources) are received by the OP / 4. This is the
only
channel on which the OP / 4 can receive modulation and bypass controllers.
36 - Control Channel Reception
Range: Disabled or Enabled
The next parameter (36) allows you to enable or disable the receiving of MIDI controllers for the
entire system.
ENSONIQ
DP/4 Musician's Manual
143