ENSONIQ DP/4 Musician's Manual page 67

Section 3 - Config Parameters
Input Select=
CD
(34)
Stereo
04 - CD Input Select
Range: (34) Stereo or (3) Mono
This parameter selects either a mono or stereo input for Units C and D.
05 - AB (Config Dependent)
06 - CD (Config Dependent)
For a complete discussion of config dependent parameters, please refer to
1 Source Config parameters 04 and 05 earlier in this section.
(b)ypass (k)ill
t=i=b B=b C=b D=b
07 - Bypass Kill (Unit) A
08 - Bypass Kill (Unit) B
09 - Bypass Kill (Unit) C
10 - Bypass Kill (Unit) D
These parameters determine what happens when you bypass a unit (the red LED is lit). When set
to bypass (b), only the dry signal passes through the unit. When set to kill (k), no signal passes
through the unit.
ENSONIQ DP/4 Musician's Manual
51