ENSONIQ DP/4 Musician's Manual page 41

Section 2 - Getting Started
2 Source Configs
The 2
Source Config
divides the DP /4 into 2 multi-effects processors, each containing 2 units of
processing power. One signal is fed to A & B; the other is fed to C & D. The two pairs function as
entirely independent, 2 Unit devices.
2 Source, Stereo In
2 Source, Mono In
Inputs Units Outputs Inputs Units Outputs
: =-
--:I~:I
: : : :
:-"·I~ f l
: : :
: =---:IJI :::
:
:---1·~I~1
: : :
In the first example, the signal present at Inputs 1 and 2 will be fed as a stereo signal to Units A
and B. The signal present at Inputs 3 and 4 will be fed as a stereo signal to Units C and D. In the
second example, the signal present at Input 1 will be fed as a mono signal to Units A and B. The
signal present at Input 3 will be fed as a mono signal to Units C and D.
In both examples, the stereo output of the AB pair goes to Outputs 1 and 2; the stereo output of
the CD pair goes to Outputs 3 and 4. (If nothing is plugged into Output jacks 3 and 4, that signal
would be mixed into Outputs 1 and 2.) Signal routing between A & B, and between C & D, is
determined by the settings of the various Config parameters.
The 2 Source Config is useful for:
• Processing separately the outputs of two keyboards, or a guitar and a keyboard;
• Studio applications where you want two separate multi-effects (such as Chorus & Reverb or
Flange & Delay) processing two different signals at the same time;
• Mixed applications, such as processing a guitar plugged into Input 1 with Units A & B, while
simultaneously processing the Aux Send of a mixer connected to Input 3 (&4 if stereo) with
UnitsC&D.
In Select Mode, when a 2 Source Config Preset is selected, the display shows:
l
Preset Name :
2
Src: Stereo
In
chotrev
flatddl
3-leUer abbreviations for Algorithms
, f
j
, fft
,
loaded into A, B, C and 0 ~
~
Symbols showing routing
between pairs of units but
not
between Band C
Note that there is no signal routing symbol between B and C on the lower line of the display.
This shows that there is no connection between Units A & B and Units C & D.
ENSONIQ DP/4 Musician's Manual
25