Source Config - ENSONIQ DP/4 Musician's Manual

Section 3 - Config Parameters
3 Source Config
52
nn
UU
00 - 3 Source Config
3 Source
1)1=1 2)8
Config
34
)CD
The 3 Source Config divides the DP / 4 into 3 effects processors. Units A and B function
independently as 1 Unit processors, while C and D are grouped together as a single 2 Unit effects
processor.
nl
U I
01 - AB Output Select
Output Select
8)2
DualMono
Range: Dual Mono or Mixed Stereo
This parameter allows you to assign Units A and B as two independent mono signals to Outputs
1 and 2 respectively, or mix Units A and B into a stereo output.
02 - CD Unit Routing
Range: serial, parallel, feedback1, or feedback2
Units C and D can be routed together in one of four different ways, as explained earlier in the 1
Source Config parameters.
I/ <r···
CD· · ·
· · · · · I· · · ~ ;~t.. · · s;i;~t= · ·
(34)
Stereo
03 - CD Input Select
Range: (34) Stereo or (4) Mono
This parameter selects either a mono (Input 3) or stereo (Inputs 3 and 4) signal for Units C and D.
ENSONIQ DP/4 Musician's Manual