ENSONIQ DP/4 Musician's Manual page 122

106
Section 4 - Algorithms
05 - 8V Chorus Stereo Spread
Range: 00 to 99
This parameter offers a synthesized stereo field. The highest value is true stereo, intermediate
values have the left and right signals mixed on both sides, and the lowest value yields only the
left input channel from the right and left outputs. This parameter, though not a stereo pan,
provides some interesting stereo effects when controlled by a modulation source.
06 - 8V Chorus Regen
Range: 00 to 99
This parameter determines the amount of signal that will be fed from the output of the chorus
back into the input of the chorus. A value of 00 will eliminate the regeneration effect.
07 - 8V Chorus Left Regen Time
Range: 0 to 800 ms
Controls the amount of time that the non-chorused signal will delay for the left channel.
08 - 8V Chorus Right Regen Time
Range:
a
to 800 ms
Controls the amount of time that the non-chorused signal will delay for the right channel.
09 - 8V Chorus Delay Regen
Range: 00 to 99
This parameter determines the amount of signal that will be fed from the delay output back into
the chorus input, increasing the number of repeats in the delay for high values (see diagram). A
value of 00 will eliminate the delay effect.
10 -
Mod1 Source
11 - Mod1 Destination
12 - Mod1 Param Range Min
13 - Mod1 Param Range Max
14 - Mod2 Source
15 - Mod2 Destination
16 - Mod2 Param Range Min
17 - Mod2 Param Range Max
See the descriptions under the Algorithm Modulators covered earlier in this section.
ENSONIQ DP/4 Musician's Manual