Sensor (Stapler Ejector Hp) Removal - Lexmark M5150 Service Manual

Installation note: Make sure the cables don't get in the way of moving parts.

Sensor (stapler ejector HP) removal

1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler diverter plunger assembly. See
4
Remove the stapler drive gear assembly. See
5
Remove the stapler feed roll. See
6
Remove the stapler chute assembly. See
E
"Stapler left cover removal" on page
"Stapler right cover removal" on page
"Stapler diverter plunger assembly removal" on page
"Stapler drive gear assembly removal" on page
"Stapler feed roll removal" on page
"Stapler chute assembly removal" on page
Repair information
681
630.
624.
668.
672.
674.
4063
667.