Staple, hole punch tray link tension spring removal
1
Remove the finisher left cover. See
2
Remove the finisher right cover. See
3
On the left side of the finisher, unhook the tension spring (A), and then remove.
4
On the right side of the finisher, unhook the tension spring (B), and then remove.
Staple, hole punch tray link removal
1
Remove the finisher left cover. See
2
Remove the finisher right cover. See
3
Remove the stapler controller PCBA. See
"Staple, hole punch left cover removal" on page
"Staple, hole punch right cover removal" on page
"Staple, hole punch left cover removal" on page
"Staple, hole punch right cover removal" on page
"Stapler controller PCBA removal" on page
Repair information
774
4063
739.
741.
739.
741.
749.