Hcoe Belt Tensioner Removal; Hcoe Tray Pinion Removal - Lexmark M5150 Service Manual

5
Disconnect the cable, remove the mylar cover (C). Release the latches to remove the sensor from the bracket. Pull
the sensor off the bracket, and remove.

HCOE belt tensioner removal

1
Remove the HCOE right cover. See
2
Remove the HCOE latch.See
3
Remove the HCOE tray pinion. See
4
Remove the HCOE drive belt. See
5
Remove the screw (A) from the tensioner.
C
"HCOE right cover removal" on page
"HCOE option latch removal" on page
"HCOE tray pinion removal" on page
"HCOE drive belt removal" on page
Repair information
601
588.
594.
598.
602.
4063