Hcit Controller Pcba Removal - Lexmark M5150 Service Manual

5
Pull the tab to release, then remove the right cover.

HCIT controller PCBA removal

1
Remove the HCIT rear cover. See
2
Remove the HCIT left cover. See
3
Disconnect all the cables (J3, J5, J11, J10, J9, J8, J7 and J1) from the controller PCBA, then remove the two screws
(A).
"HCIT rear cover removal" on page
"HCIT left cover removal" on page
Repair information
541
536.
537.
4063