7
Disconnect the sensor cable (A), and then remove the screw (B) from the sensor bracket. Release the latches securing
the sensor to the bracket, and then remove the sensor.
Stapler ejector motor assembly removal
1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler diverter plunger assembly. See
4
Remove the stapler drive gear assembly. See
5
Remove the stapler feed roll. See
6
Remove the stapler chute assembly. See
"Stapler left cover removal" on page
"Stapler right cover removal" on page
"Stapler diverter plunger assembly removal" on page
"Stapler drive gear assembly removal" on page
"Stapler feed roll removal" on page
"Stapler chute assembly removal" on page
Repair information
678
B
A
630.
624.
672.
674.
4063
667.
668.