Stapler Door Close Limit Switch Removal - Lexmark M5150 Service Manual

Stapler door close limit switch removal

1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler top cover. See
4
Remove the four screws (A) securing the stapler carriage frame.
5
Disconnect the cables (B) from the stapler carriage assembly.
6
Lift the stapler carriage frame, then remove the two screws from the stapler carriage assembly (C).
"Stapler left cover removal" on page
"Stapler right cover removal" on page
"Stapler top cover removal" on page
Repair information
626
630.
624.
635.
4063