Pcba Housing Removal - Lexmark M5150 Service Manual

PCBA housing removal

Note: When removing the PCBA housing, the controller board will remain attached to the PCBA housing.
1
Remove the right cover. See
2
Remove the rear lower cover. See
3
Remove the LVPS. See
4
Remove the left cover. See
5
Disconnect all of the cables from the controller board.
6
Remove the five screws (A).
7
Remove the PCBA housing.
"Right cover removal" on page
"Rear lower cover removal" on page
"LVPS removal" on page
"Left cover removal" on page
Repair information
505.
454.
511.
489.
500
4063