Error
Description
code
84
Imaging unit—nearly low
84
Imaging unit—middle warning
84
Imaging unit—late warning
84
Imaging unit—end of life
88
Toner cartridge low
Toner level sensing error check
Action
Step 1
Ensure that the toner cartridge is installed properly.
Is the toner cartridge properly installed?
Step 2
Remove the existing toner cartridge and install a different cartridge.
Does the error continue?
Step 3
Ensure the cable for socket "JCTLS" on the controller board is properly
connected.
Is the above connection properly connected?
Step 4
Ensure the toner low / imaging unit high voltage contact is free from
damage.
Is the toner low / imaging unit high voltage contact free from damage?
Step 5
Reset the machine.
Does the error continue?
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Replace the controller
board. See
board removal" on
page
Diagnostic information
235
Action
Replace the imaging unit.
Replace the toner cartridge.
No
Reinstall the toner
cartridge properly.
Problem resolved.
Reseat the connection
or replace the cable.
Go to step 4.
Replace the toner low /
imaging unit high
voltage contact.
Problem resolved.
"Controller
492.
4063