Lexmark M5150 Service Manual page 283

Symptom
The HCIT does not detect when the media level is low.
The HCIT is not detected or recognized.
Incorrect media is detected on the HCIT.
The finisher detects the side door as open even when it is closed.
Media doesn't exit at the assigned mailbox bin.
The stapler unit does not detect the staple cartridge.
The staple finisher option is not detected or recognized.
The staple finisher detects media even when the bin is cleared.
The finisher detects the rear door as open even when it is closed.
The stapler unit won't staple.
The stapler bin LED doesn't light up, media isn't detected on the output
bin.
The HPU finisher does not detect the hole punch box.
The HPU finisher detects the rear door as open even when it is closed. Go to
Holes punched are missing or misaligned.
Media is stuck on the hole puncher.
The output expander detects the rear door as open even when it is
closed.
The output expander option is not detected or recognized.
The output expander detects the bin as full even when it is not.
The HCOE detects the bin as full even when it is not.
The HCOE bin can't move up or down.
The HCOE is not detected or recognized.
Action
Go to
on page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
page
Go to
check" on page
Go to
on page
check" on page
Go to
check" on page
Go to
on page
Go to
service check" on page
Go to
on page
Go to
page
Go to
Go to
Go to
page
Diagnostic information
283
"HCIT media low undetected service check"
293.
"HCIT undetected service check" on
291.
"HCIT incorrect media error service check" on
287.
"Finisher side door error service check" on
298.
"Mailbox incorrect bin exit service check" on
295.
"Finisher cartridge error service check " on
300.
"Finisher undetected service check" on
301.
"Finisher bin error service check " on
302.
"Finisher door undetected service check " on
304.
"Stapler carriage failure service check" on
305.
"Finisher bin media present error service
307.
"Hole punch box undetected service check"
311.
"Finisher door (HPU) undetected service
312.
"Missing or misaligned hole punch service
309.
"Stuck media on hole puncher service check"
308.
"Output expander rear door undetected
314.
"Output expander undetected service check"
315.
"Output expander bin error service check" on
316.
"HCOE bin error service check" on page
"HCOE bin error service check" on page
"HCOE undetected service check" on
318.
4063
318.
318.