Registering Stored Program; Deleting A Stored Program - Fuji Xerox DocuCentre-II 7000 User Manual

All in one printer
Hide thumbs Also See for DocuCentre-II 7000:
Table of Contents

Advertisement

6 Stored Programming

Registering Stored Program

Up to 58 actions can be registered with one stored program. Up to 40 stored programs
can be registered in the machine.
One touch buttons M01 to M20 are associated with stored programs 1 to 20,
respectively.
The following is the procedure for registering actions with stored programs.
Important • If registered settings such as tray paper size and comments, or default values in the system
Note
1
Select [Store].
2
Select the number to register.
Note
3
Set the feature you want to register.
Note
6
You can change the volume of the sound that notifies of stored program registration. For information on
the settings, refer to "6 System Settings" > "Common Settings" > "Audio Tones" > "Stored
Programming Tone" in the Administrator Guide.
4
Press the <Start> button or <Clear All> button.
Note
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.155).

Deleting a Stored Program

The following is the procedure for deleting stored programs.
1
Select [Delete].
2
Select the number to delete.
Note
3
Select [Yes].
Yes
Deletes the stored program.
Note
154
settings are changed after a stored program is registered, then the program's content also
changes.
• Services using System Settings, Job Flow Sheet, or Address Book cannot be registered.
• The registering procedure for a stored program is cancelled when the <Interrupt> button is
pressed, the Auto Clear feature causes a time-out, or a popup window (paper jam, etc.)
appears.
• Once a job is stored to a
button, it cannot be
overwritten.
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
• Press the <Interrupt> button to cancel registration.
• The machine produces an audible tone while a stored program is registered.
• If no name is entered for a registered stored program, the name becomes "No Name".
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
• Deleted stored programs cannot be restored.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-ii 6000

Table of Contents