Polaris Ranger RZR XP 900 2011 Service Manual page 96

ENGINE I COOLING
5. If starter gear was replaced, replace the intermediate gear
and inspect the torque limit gear.
6. After assembly, be sure the starter gear rotates in the
clockwise direction only.
Crankcase Disassembly I Inspection
1. Remove the oil cooler (A) from the crankcase.
2. Remove the crankcase drain plug (B) to drain any oil
remaining in the engine.
3.44
3. Locate the Oil Catch Tool (PN 5438829) in the vehicle's
tool kit. Position the tool below the oil filter to catch the oil
when the filter is removed. Remove the oil filter.
4. Install the Cylinder Holding & Camshaft Timing Plate (PU-
50563) onto the cylinder. The cylinder holding tool retains
the cylinder and pistons when the engine is rotated.
5. Rotate the engine to access the crankcase sump cover.
6. Remove the (15) M6 bolts retaining the sump cover (C) to
the crankcase.
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.