Fuel Lines - Quick Connect Fittings - Polaris Ranger RZR XP 900 2011 Service Manual

Fuel Lines - Quick Connect Fittings
Fuel Supply
Fuel Supply Line Removal
1. Place a shop towel around the fuel line to catch any
dripping fuel.
2. If removing either end of supply line, pull open both tabs
while moving the green connector out to release the line.
ELECTRONIC FUEL INJECTION
3. Pull on the fuel line for removal.
4. To install the line, verify the connections are clean and free
of debris.
5. Place the fuel line back over the fitting and slide the green
connector locking mechanism back into place. Verify the
connector tabs snap back into place.
6. Be sure fuel line is routed and retained properly.
Fuel Return Line Removal
1. Place a shop towel around the fuel line to catch any
dripping fuel.
2. If removing either end ofreturn line, squeeze the connector
4
tabs together and push the white locking slide back to
release the line.
3. Pull on the fuel line for removal.
4. To install the line, verify the connections are clean and free
of debris.
5. Place the fuel line back over the fitting and slide the white
connector locking mechanism back into place. Verify the
connector tabs snap back into place.
6. Be sure fuel line is routed and retained properly.
4.9
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.