Polaris Ranger RZR XP 900 2011 Service Manual page 35

I
7. Remove the breather hose (A) from the valve cover, remove
the PVT outlet duct (B), remove the harness from the IAC
valve (C), remove the (3) hoses (D) from the IAC valve and
remove the (2) screws (E) that mount the air box to the
upper frame cross member.
8. Remove the spark plug wires from the engine.
9. Remove the (3) push rivets that retain the heat shield to the
frame cross members. Remove the heat shield.
,
/~
Heat i :
8.-
Shield
Y
10. Support the oil tank in position prior to removing the rear
cross member.
MAINTENANCE
11. Remove the (4) bolts that attach the rear cross member to
the vehicle frame. Raise and slide the cross member
towards the rear ofthe vehicle to gain access to valve cover
as shown below.
12. Remove the (4) T40 bolts retaining the valve cover.
2.19
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.