ENGINE I COOLING
Oil Pressure Test
1.
Attach the Oil Pressure Gauge Adapter (PU-50565) to the
Oil Pressure Gauge (pV-43531).
PU-50565
~
~
PV-43531
2.
Remove the seats and engine service panel.
3.
Clean the area around the main oil gallery plug (A), located
in the upper crankcase on the MAG side of the engine.
4.
Remove the plug (A) and insert the oil pressure adapter.
5.
Start engine and allow it to reach operating temperature,
monitoring gauge indication.
NOTE: Test results are based on the use of the
recommended engine oil (Polaris PS-4 Plus) at
operating temperature, and may vary considerably if
any other oil is used or if engine is not up to
temperature.
3.4
6.
Upon assembly, torque the crankcase gallery plug to
specification.
C
=T
Crankcase Gallery Plug:
11 ft. Ibs. (15 Nm)
9923144 - 2011 RANGER RZR XP 900 Service Manual
©
Copyright 2011 Polaris Sales Inc.