3.
Remove the LH output hub assembly from the clutch
housing or outer cover plate assembly.
FINAL DRIVE
5.
Remove the torsion spring retainer and torsion spring from
the top ofthe ring gear.
NOTE: Nylon spacer is non-serviceable and should
not be removed.
6.
Remove the clutch housing / ring
assembly from the gearcase housing.
I
gear and roll cage
4.
Remove and inspect the armature plate. Refer to "AWD
Diagnosis" for detailed inspection process.
7.17
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.