Polaris Ranger RZR XP 900 2011 Service Manual page 125

ENGINE I COOLING
NOTE: Do not touch sealing sutfaces of gasket.
8. Torque cylinder head bolts in sequence to specification.
4. Guide cam chain (D) through a new head gasket (E) and
install the gasket on the cylinder, locating it on the
alignment pins.
5. Carefully set the cylinder head (F) in place on alignment
pins.
6. Install new bolts and finger tighten the (6) cylinder head
bolts (G) evenly.
7. Install and finger tighten the (2) outer M6 bolts (H) evenly.
I
Cylinder Head Torque Procedure:
Step
4:
Torque Outer M6 Head Bolts
89 ± 9 in. Ibs. (10 ± 1 Nm)
Step 1: Torque in Sequence
21 ft. Ibs. (28 Nm)
5
e
=T
Step 2: Torque in Sequence
26 ft. Ibs. (35 Nm)
Step 3: Torque in Sequence
Additional 180° (1/2 turn)
3
~
r!
Ii
\i
i' G
IMPORTANT: Install new cylinder head bolts.
3.73
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.