Polaris Ranger RZR XP 900 2011 Service Manual page 240

CLUTCHING (PVT)
6. Remove the spider assembly and spring (B). 10. Press out the spring pins (I) in the inner sheave.
12. Press the shaft and bearing out ofthe outer sheave using an
arbor press.
'"'"""'---
11. Pull out the clutch roller pins
(J)
and rollers (K).
8. Remove the E-clips
(F),
washers (G), and the clutch rollers
(E). Inspect the rollers for wear; replace ifwom.
7. Remove the inside spider plate (D) and spider dampener
(E). Inspect the spider dampener (E) for wear and replace
if needed.
NOTE: Spring is compression only and has no
torsional wind.
9. Remove the clutch assembly from the holding tool.
6.22
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.