Table of Contents
Advertisement
CRANKING SYSTEM (0.9 kW, 1.2 kW and 1.4 kW Reduction Type) 6G-7
2) Remove bolts shown in left figure, then separate reduction
gear assembly from starting motor assembly.
1. Bolts
2. Reduction gear assembly
3) To overhaul reduction gear assembly, remove packing and
planetary gears.
1. Planetary gear
2. Packing
4) Remove seal rubber and plate.
1. Seal rubber
2. Plate
5) Remove shaft assembly with lever.
1. Shaft ass'y
2. Lever
6) Loosen pinion stop ring fixed by snap ring.
1. Snap ring
2. Pinion stop ring
3. Over-running clutch assembly
Hide quick links:
Advertisement
Chapters
Table of Contents
