Piston, Piston Rings, Connecting Rods And Cylinders - Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual

Piston, Piston Rings, Connecting Rods and Cylinders

COMPONENTS
1. Top ring
2. 2nd ring
3. Oil ring
4. Piston
5. Connecting rod
: Do not apply engine oil to inner surface of
rod big end.
7) Adjust intake and exhaust valve lashes referring to "Valve
Lash (Clearance)" in this section.
8) Adjust accelerator cable play and A/T throttle cable play.
Refer to "Accelerator Cable Adjustment" and "A/T Throttle
Cable Adjustment" in Section 6E1.
9) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been rein-
stalled.
10) Refill cooling system referring to "Cooling System Flush and
Refill" in Section 6B.
11) Connect negative cable at battery.
12) Verify that there is no fuel leakage, coolant leakage and
exhaust gas leakage at each connection.
13) Confirm that ignition timing is within specification referring to
"Ignition Timing Check" in Section 6F1.
6. Connecting rod bearing cap
: Do not apply engine oil to inner surface of cap.
7. Connecting rod bearing
: Do not apply engine oil between rod big end
and bearing, between cap and bearing.
8. Piston pin
9. Piston pin circlip
10. Connecting rod bearing cap nut
ENGINE MECHANICAL (G16 ENGINE) 6A1-53
Tightening torque
Do not reuse.
Apply engine oil to sliding surface of each part.