Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual page 357

6A1-66 ENGINE MECHANICAL (G16 ENGINE)
22) Install lifting device.
23) Remove engine mounting bracket nuts (R & L).
24) Before lifting engine, check to ensure all hoses, electric wires
and cables are disconnected from engine.
25) Remove engine assembly from chassis and transmission by
lifting a little, sliding towards the front side, and then carefully
hoist engine assembly.
INSTALLATION
1) Lower engine assembly into engine compartment and con-
nect engine to transmission.
Hand-tighten bolts and nuts fastening cylinder block and
transmission.
2) Tighten engine mounting bracket nuts (R & L).
Tightening torque
Engine mounting bracket nut
(a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
3) Tighten bolts fastening cylinder block and transmission to
specified torque.
Tightening torque
Transmission to cylinder block bolt
(a) : 85 N·m (8.5 kg-m, 61.5 lb-ft)
4) Remove lifting device.