Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual page 484

8) Install flywheel (M/T vehicle) or drive plate (A/T vehicle).
Using special tool, lock flywheel or drive plate, and tighten
flywheel or drive plate bolts (1) applied with sealant to speci-
fication.
"A" : Sealant 1215 99000-31110
Special tool
(A) : 09924-17811
Tightening torque
Flywheel or drive plate bolt
(c) : 70 N·m (7.0 kg-m, 51.0 lb-ft)
9) Install oil pump, pistons and connecting rods referring to "Oil
Pump" and "Pistons, Piston Rings, Connecting Rods and
Cylinders" in this section.
10) Install oil pump strainer and oil pan.
11) Install cylinder heads assembly to cylinder block referring to
"Valves and Cylinder Heads" in this section.
12) Install oil pump chain referring to "Oil Pump Chain" in this
section.
13) Install RH bank 2nd timing chain and tensioner "RH (No.2)
Bank 2nd Timing Chain and Chain Tensioner" in this section.
14) Install 1st timing chain and tensioner "1st Timing Chain and
Chain Tensioner" in this section.
15) Install LH bank 2nd timing chain and tensioner "LH (No.1)
Bank 2nd Timing Chain and Chain Tensioner" in this section.
16) Install timing chain cover and crank pulley referring to "Tim-
ing Chain Cover" in this section.
17) Install cylinder head covers referring to "Cylinder Head Cov-
ers" in this section.
18) Install exhaust manifold referring to "Exhaust Manifold" in
this section.
19) Install intake manifold with throttle body referring to "Throttle
Body and Intake Manifold" in this section.
20) Install clutch to flywheel (for M/T vehicle). For clutch installa-
tion, refer to "Clutch Cover, Clutch Disc and Flywheel" in
Section 7C1.
21) Install engine assembly to vehicle referring to "Engine
Assembly" in this section.
ENGINE MECHANICAL (H25 ENGINE) 6A2-109