Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual page 175

6-1-34 ENGINE GENERAL INFORMATION AND DIAGNOSIS (H25 ENGINE)
#
SHIFT SOL 1 CON/MON (SHIFT SOLENOID
CON-ON : ON command being output to shift solenoid
CON-OFF : ON command not being output.
MON-ON : Electricity being passed to shift solenoid
MON-OFF : Electricity not being passed.
#
SHIFT SOL 2 CON/MON (SHIFT SOLENOID
CON-ON : ON command being output to shift solenoid
CON-OFF : ON command not being output.
MON-ON : Electricity being passed to shift solenoid
MON-OFF : Electricity not being passed.
TCC SOL CON/MON (TORQUE CONVERTER CLUTCH SOLENOID COMMAND/MONITOR, ON/OFF)
CON-ON : ON command being output to TCC solenoid.
CON-OFF : ON command not being output.
MON-ON : Electricity being passed to TCC solenoid.
MON-OFF : Electricity not being passed.
TRANS RANGE (TRANSMISSION RANGE, R, N, D, 2 or L)
It indicates transmission range according to transmission range switch signal.
BRAKE SW (BRAKE, STOP LAMP, SWITCH, ON/OFF)
OFF : Brake pedal is released.
ON : Brake pedal is depressed.
O/D OFF SW (OVERDRIVE CUT SWITCH, ON/OFF)
OFF : Overdrive cut switch OFF.
ON : Overdrive cut switch ON.
MODE SELECT SW (POWER/NORMAL CHANGE SWITCH, POWER/NORMAL)
POWER : Switch button is at POWER position.
NORMAL : Switch button is at NORMAL position.
4WD-L SW (4WD-LOW SWITCH, ON/OFF)
ON : Transfer lever is shifted to 4L position.
OFF : Transfer lever is shifted to 4H or 2H position.
BLOWER FAN (ON/OFF)
ON : Blower fan switch ON.
OFF : Blower fan switch OFF.
A/C CONDENSER FAN (A/C CONDENSER FAN RELAY, ON/OFF)
ON : A/C condenser fan is operated.
OFF : A/C condenser is not operated.
#
1, A COMMAND/MONITOR, ON/OFF)
#
1, A.
#
1, A.
#
2, B COMMAND/MONITOR, ON/OFF)
#
2, B.
#
2, B.