Table of Contents
Advertisement
Oil Relief Valve
Check oil relief valve for clogging and ball for being stuck.
INSTALLATION
1) Before installing valve lash adjuster to cylinder head (1), fill
oil passage of cylinder head with engine oil according to fol-
lowing procedure.
Pour engine oil through oil holes (2) and check that oil comes
out from oil holes in sliding part of valve lash adjuster.
Perform this check on both intake and exhaust sides.
2) Install valve lash adjusters to cylinder head.
Apply engine oil around valve lash adjuster and then install it
to cylinder head.
3) Match key (1) on crankshaft to timing mark (2) as shown in
figure.
ENGINE MECHANICAL (J20 ENGINE) 6A4-47
Hide quick links:
Advertisement
Chapters
Table of Contents
