6A1-22 ENGINE MECHANICAL (G16 ENGINE)
REMOVAL
1) Raise vehicle.
2) Remove front differential housing (1) with differential (2)
referring to "Dismounting" in Section 7E.
3. Oil pan
3) Disconnect CKP sensor coupler and remove CKP sensor by
removing its bolt. (if equipped)
4) Drain engine oil by removing drain plug (2).
1. Oil pan
5) Remove clutch housing (torque converter housing for A/T)
lower plate (1).
6) Remove oil pan (3) and then oil pump strainer (2).
1. Cylinder block