Timing Chain Cover - Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual

6A2-26 ENGINE MECHANICAL (H25 ENGINE)

Timing Chain Cover

COMPONENTS
1. Timing chain cover 3. Crankshaft pulley bolt
2. Crankshaft pulley 4. Oil seal
5. O-ring 7. CKP sensor bolt
6. CKP sensor 8. Timing chain cover bolt
REMOVAL
1) Disconnect negative cable at battery.
2) Drain engine oil.
3) Drain coolant.
4) Remove throttle body and intake manifold.
Refer to item "Throttle Body and Intake Manifold" in this sec-
tion for removal.
5) Remove cylinder head covers.
Refer to "Cylinder Head Cover" in this section for removal.
6) Remove cooling fan, fan clutch and water pump pulley.
Refer to "Cooling Fan and Fan Clutch" in Section 6B for
removal.
7) Remove radiator.
Refer to "Radiator" in Section 6B for removal.
8) Remove thermostat cap.
Refer to "Thermostat" in Section 6B for removal.
9) Remove P/S pump (A/C compressor) drive belt.
Refer to Section 3B1 for removal.
10) Remove water pump drive belt.
Refer to "Cooling Fan belt" in Section 6B for removal.
11) Remove P/S pump and P/S pump bracket.
Refer to "Power Steering Pump" in Section 3B1 for removal.
12) Raise vehicle.
13) Remove oil pan.
Refer to "Oil Pan and Oil Pump Strainer" in this section for
removal.
Tightening Apply engine oil
torque
Do not reuse