Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual page 516

2) Apply sealant "A" and "B" to area as shown in figure.
"A" : Sealant 99000-31250
"B" : Sealant 99000-31140
"a" : 3 mm (0.12 in.)
"b" : 2 mm (0.08 om/)
1. Timing chain cover
2. Cylinder head
3. Cylinder block
4. Dowel pin position
3) Apply engine oil to oil seal lip, then install timing chain cover
(1).
Tighten bolts (3) to specified torque.
NOTE:
Before installing timing chain cover, check that pin is
securely fitted.
Tightening torque
Timing chain cover bolt (a) : 11 N·m (1.1 kg-m, 8.0 lb-ft)
2. Nut
4) Install crankshaft pulley (1).
To lock crankshaft pulley, use special tool (camshaft pulley
holder) with it at shown in figure.
Special tool
(A) : 09917-68221
NOTE:
Be sure to use the following bolt (2) for fixing special tool
to crankshaft pulley.
Bolt size : M8, P1.25, L = 45 mm
Strength : 7T
Tightening torque
Crankshaft pulley bolt (a) : 150 N·m (15 kg-m, 108.5 lb-ft)
3. Wrench
ENGINE MECHANICAL (J20 ENGINE) 6A4-27