Suzuki Engine 2002 GRAND VITARA SQ420 Service Manual page 742

Heated oxygen sensor
Fuel pressure regulator bolts
Fuel pipe union bolts
Engine coolant temp. sensor
TP sensor screw
(See NOTE "A".)
NOTE:
• "A" : This kit includes the following items.
1. Pressure gauge 09912-58441, 2. Pressure hose 09912-58431, 3. 3-way joint & hose 09912-58490,
4. Checking tool set 09912-58421, 4-1. Tool body & washer, 4-2. Body plug, 4-3. Body attachment-1
4-4. Holder, 4-5. Return hose & clamp, 4-6. Body attachment-2 & washer, 4-7. Hose attachment-1
4-8. Hose attachment-2
• "B" : This kit includes the following items and substitutes for the Tech 1A.
1. Tech 2, 2. PCMCIA card, 3. DLC cable, 4. SAE 16/19 adaptor, 5. Cigarette cable, 6. DLC loopback
adaptor, 7. Battery power cable, 8. RS232 cable, 9. RS232 adaptor, 10. RS232 loopback connector,
11. Storage case, 12. Power supply.
4) After checking vacuum, stop engine and remove PCV valve
5) After checking, connect PCV valve, PCV hose and clamp
Tightening Torque Specifications
Fastening part
Special Tool
09917-47010
Vacuum pump gauge
ENGINE AND EMISSION CONTROL SYSTEM (H25 ENGINE) 6E2-49
(1).
Shake valve and listen for the rattle of check needle inside
the valve. If valve does not rattle, replace valve.
securely.
N•m
45
11
30
15
2.5
09930-88521
Injector test lead
Tightening torque
kg-m lb-ft
4.5 32.5
1.1 8.0
3.0 22.0
1.5 11.0
0.25 1.8
Tech 2 kit SUZUKI scan
tool (See NOTE "B".)