Removing The Main Controller Pcb (Sub Rb-A2) - Canon iR C3380 series Service Manual

Chapter 4
[2]
[1]
2) Remove the main controller PCB (sub SJ-A)
- 2 screws [2]
[1]
4.7.6 Main Controller PCB (sub LAN-A)
4.7.6.1 Before Removing the Main Controller PCB (sub
LANBAR-C)
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach the left rear cover. (page 10-14)[Detaching the Left Rear Cover]
4.7.6.2 Removing the Main Controller PCB (sub
LANBAR-C)
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the main controller cover [1].
- 14 screws [2]
[2]
[1]
2) Remove the main controller PCB (sub LANBAR-C)
- 2 connectors [2]
- 2 screws [3]
4-16
[2]
[2]
[2]
F-4-25
[2]
F-4-26
[2]
[2]
[2]
F-4-27
4.7.7 Main Controller PCB (sub RB-A)
4.7.7.1 Before Removing the Main Controller PCB (sub
RB-A2)
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach the left rear cover. (page 10-14)[Detaching the Left Rear Cover]

4.7.7.2 Removing the Main Controller PCB (sub RB-A2)

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the 2 HDD mount [2].
- 2 screws [1] each
[2]
0013-6781
0013-6785
1) Remove the main controller PCB (sub RB-A2) [4].
In the case the main controller PCB (sub RB-A2) is not attached, this proce-
dure is not required.
- 2 screws [1]
- 1 mount [2]
- 1 connector [3]
[1]
[2]
[2] [2] [1] [3]
F-4-28
[2]
[1]
[2]
F-4-29
[4] [3]
F-4-30
0013-6782
0013-6786
[2]