Canon iR C3380 series Service Manual page 83

7) Fix the key switch unit [2] to the key switch bracket [1].
- 1 screw (binding; M4X6) [3]
8) Disconnect the connector [1] on the main body from the wire saddle [2] to get it out to the rear side of the main body.
9) Close the wire saddle.
10) Fix the key switch bracket [1].
- 1 screw [2] (Screw removed in the step 6))
11) Connect the connector of the key switch unit to the connector [1] of the main unit.
[1]
[2]
F-2-85
[2]
[1]
F-2-86
F-2-87
[1]
[2]
F-2-88
[3]
[2]
[1]
Chapter 2
2-27