10) Remove the screw [2] and the blanking seal [3] fixed to the right upper cover [1] (Do not use the removed screw and blanking seal).
11) Mount the speaker unit (lower) [1].
- 1 screw (binding; M4X20) [2]
- 1 screw (binding; M3X20) [3]
12) Mount the speaker unit (upper) [1] on the speaker unit (lower), fix them with two screws (binding; M4X6) [2] from beneath.
13) Detach the cover [1] of the cable guide.
14) Peel off the released paper of the cable guide [1], affix it to the position on the right side as in the chart.
[2]
[3]
[1]
F-2-147
[1]
[3]
[2]
F-2-148
[1]
[2]
F-2-149
[1]
F-2-150
Chapter 2
2-51