Canon iR C3380 series Service Manual page 526

Chapter 17
Sub item
FAN-ON
MTR
MTR-ON
SL
SL-ON
8. CLEAR
Sub item
ERR
17-42
COPIER>FUNCTION>PART-CHK
Start the fan operation.
Operations of the power supply fan, fixing fan, and cleaner fan
1)Select the item, and press [OK] so the next operation is executed.
ON for 10 sec with normal speed > ON for 10 sec with half speed > Standby state
Operations of the machine exhaust fan, delivery cooling fan, manual feed cooling fan, delivery vertical path cooling fan,
ITB cooling power supply fan, vertical path delivery exhaust fan, and face-down tray cooling fan
1) Select the item, and press [OK] so the next operation is executed.
ON for 10 sec with normal speed > Standby state
Operation of controller fan
1)Select the item, and press [OK] so the next operation is executed.
Check the operation.
Specify motor checking the operation.
Setting range: 1 to 25 (22 or above are reserves)
Operation method
1)Select the item.
2)Enter the motor code with the numeric keypad.
1: Drum ITB motor (M1)
2: Toner container motor (Y) (M20)
3: Toner container motor (M) (M21)
4: Toner container motor (C) (M22)
5: Toner container motor (Bk) (M23)
6: Cassette 1 pickup motor (M6)
7: Cassette 2 pickup motor (M7)
8: Cassette 3 pickup motor (M51)
9: Cassette 4 pickup motor (M52)
10: Paper deck main motor (M1D) (Paper deck)
11: Pre-registration motor (M8)
12: Registration motor (M9)
13: Delivery vertical path motor (M10)
14: Face-down delivery motor (M11)
15: Reserve
16: Horizontal registration motor (M25)
17: Duplexing feed motor (M26)
18: Developing motor (Y) (M12)
19: Developing motor (M) (M13)
20: Developing motor (C) (M14)
21: Developing motor (Bk) (M15)
3)Press [OK].
4)Check the operation by pressing [MTR-ON].
Start the motor operation.
Operation method
Toner container motor (Y/M/C/K):
1)Remove the toner container, and close the front cover.
2)Select the item, and press [OK].
ON for 10 sec > OFF
Horizontal registration motor:
1)Select the item, and press [OK].
Start the HP search operation > After the completion of operation, automatically terminated
Motors other than toner container motor (Y/M/C/K) and horizontal registration motor:
1)Select the item, and press [OK].
ON for 10 sec > OFF
Used to specify solenoid for operation check.
(Range: 1 to 15; 10 and above are reserved.)
Operation method
1) Select this item.
2) Enter the desired solenoid code on the numeric keypad.
1: Manual paper feed solenoid SL1
2: Paper delivery path switching solenoid 1 SL2
3: Cassette 1 paper feed solenoid SL3
4: Cassette 2 paper feed solenoid SL4
5: Cassette 3 paper feed solenoid SL51
6: Cassette 4 paper feed solenoid SL52
7: Paper delivery path switching solenoid 2 SL5
8: Paper deck paper feed solenoid SL1D
9: Paper container OPEN solenoid SL2D
3) Press the OK key.
4) Press SL-ON, and check the operation.
Starts solenoid operation.
Operation method
1) Select this item, and press the OK key. The solenoid turns ON/OFF in the pattern below.
0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> OFF
Clears error codes.
(Cleared error codes: E000, E001, E002, E003)
Operation method
1) Select this item, and press the OK key.
2) Turn the main power OFF/ON.
Description
T-17-49
COPIER>FUNCTION>CLEAR
Description
level.
1
1
1
1
1
level.
1