Paper Jams - Lexmark MX910de Service Manual

Area name
Door D, trays
Doors C and F
Area G, doors C, J, and H, finisher
bin
Doors C and G, finisher bin
Area G, doors C, J, and H, finisher
bin

200 paper jams

[x]‑page jam, clear jammed paper from multipurpose feeder. [200.xx]
1
Remove all paper from the multipurpose feeder.
2
Remove the jammed paper.
3
Open door C to remove any paper fragments.
Note: Make sure that door C does not hit any cable attached to the printer.
4
Close door C.
Control panel message
[x]‑page jam, open door D and clear all
jammed paper. [24y.xx]
[x]‑page jam, slide the 3000‑sheet tray and
open door D. [24y.xx]
[x]‑page jam, slide the 3000‑sheet tray and
open door F. [24y.xx]
[x] page jam, open doors G, H, and J and
clear jammed paper. [4yy.xx]
[x]‑page jam, press latch beside door G and
slide finisher to the left. Leave paper in bin.
[40y.xx]
[x]‑page jam, open door H and rotate knob
SD3 clockwise. Leave paper in bin. [426.xx–
428.xx]
Diagnostic information
64
What to do
Open door D, and then remove the jammed
paper.
Pull out the tray, and then remove the
jammed paper.
Pull the 3000‑sheet tray, and then remove
the jammed paper from the side of the tray.
Open door F, and then remove the jammed
paper.
Open door G, and then remove the jammed
paper.
Open door H, and then remove the jammed
paper.
Slide the staple finisher to the left, and then
remove the jammed paper.
Open door H, and then remove the jammed
paper.
7421