Table of Contents
Advertisement
ADF/scanner image controller board service check
Actions
Step 1
Enter the Diagnostics menu, and then navigate to:
PRINTER SETUP > Reset Engine Service Error
Note: Do this step every time a service error would occur to clear the
error and restore the engine settings.
Does the error remain?
Step 2
a
Reseat the ADF CIS data cable on the ADF controller board and the
image controller board.
b
Check the cable for damage, and replace if necessary.
Does the problem remain?
Step 3
a
Make sure that the ADF/scanner image controller board is mounted
properly on the controller board.
b
Check the ADF/scanner image controller board for damaged pins, and
replace if necessary. See
removal" on page
354.
Does the problem remain?
Step 4
Check the controller board for damaged pins, and replace if necessary.
See
"Controller board removal" on page
Does the problem remain?
"ADF/scanner image controller board
356.
Diagnostic information
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Contact the next level
of support.
195
7421
No
The problem is solved.
The problem is solved.
The problem is solved.
The problem is solved.
Advertisement
Table of Contents
