Table of Contents
Advertisement
5
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
6
Reload the paper.
200 paper jam messages
Error code
Description
200.06
The sensor (registration) did not detect the paper fed
from the MPF.
200.09
While feeding from the MPF, skew correction did not
complete at the registration roller.
200.16
The sensor (registration) did not detect the paper fed
from tray 1.
200.19
While feeding from tray 1, skew correction did not
complete at the registration roller.
200.91
The paper remains detected at the sensor
(registration) after the printer is turned on.
200.92
Paper size error was detected.
200.93
While feeding from tray 2, tray 3 or tray 4, skew
correction did not complete at the registration roller.
200.99
The sensor (registration) did not detect the paper fed
from tray 2, tray 3, tray 4, or tray 5.
Registration jam service check
Action
Step 1
Enter the Diagnostics menu, and then navigate to:
EVENT LOG > Display Log
Do most of the recent error codes end with a 1? (Example: 241.11, 200.91)
Step 2
Make sure that the registration paper path, including the sensors, are free
of debris or dust.
Does the problem remain?
Action
See
"MPF jam service check" on page
See
"Registration jam service check" on page
Yes
Go to step 2.
Go to step 3.
Diagnostic information
65
7421
68.
65.
No
Go to step 8.
The problem is solved.
Advertisement
Table of Contents
