Paper Exit Fan Removal; Ihps Frame Removal - Lexmark MX910de Service Manual

Paper exit fan removal

1
Remove the scanner interface cable cover. See
2
Remove the controller board access cover. See
3
Remove the engine board cover. See
4
Remove the upper rear cover. See
5
Disconnect the cable (A), and then remove the six screws (B).
6
Remove the duct, and then remove the fan.

IHPS frame removal

Note: This part is not a FRU.
1
Remove the scanner interface cable cover. See
2
Remove the controller board access cover. See
3
Remove the engine board cover. See
4
Remove the upper rear cover. See
5
Remove the IHPS shield. See
"Scanner interface cable cover removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Upper rear cover removal" on page
"Scanner interface cable cover removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Upper rear cover removal" on page
"IHPS shield removal" on page
Repair information
360
346.
346.
A
B
346.
346.
347.
7421
344.
345.
344.
345.