X 500-Sheet Tray Transport Assembly Sensors Removal - Lexmark MX910de Service Manual

2 x 500-sheet tray transport assembly sensors removal

Note: The following procedure begins with the tray 4 transport assembly sensors. If you are removing the tray 3
transport assembly sensors, then go directly to step 5.
1
Remove the rear right cover. See
2
Remove the jam access door. See
3
Remove the bottom right cover. See
4
Remove the tray 4 transport assembly. See
5
Remove the appropriate FRU.
"2 x 500-sheet tray rear right cover removal" on page
"2 x 500-sheet tray jam access door removal" on page
"2 x 500-sheet tray bottom right cover removal" on page
"2 x 500-sheet tray 4 transport assembly removal" on page
Repair information
492
7421
489.
488.
490.
491.