Controller Board Fan Removal - Lexmark MX910de Service Manual

7
From the rear, remove the two screws (B).
8
Disconnect the four cables (C), and then open the frame.

Controller board fan removal

1
Remove the port access door. See
2
Remove the controller board access cover. See
3
Remove the engine board cover. See
4
Remove the scanner interface cable cover. See
5
Remove the upper rear cover. See
B
"Port access door removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Scanner interface cable cover removal" on page
"Upper rear cover removal" on page
Repair information
366
278.
346.
346.
7421
345.
344.