Barcode Error Messages
The inserter software uses the same error messages for both OMR and
barcode scanning. Use this table as a reference for understanding and
troubleshooting error messages.
Message
No OMR marks
Expected first sheet
of set
Not a new envelope
OMR: Sequence
error
OMR: SF Marks
Inconsistent
OMR: Set to Large
OMR: End of Batch –
Ready to Run
Mode change
re-check feeders
SV63138 Rev. A
Issue
• Barcode was
not seen by
scanner.
• Paper not
loaded correctly.
Expected first
sheet of set was
not detected by
barcode scanner.
First sheet of set
was detected; rest
of sheets were
expected.
Sequence number
in barcode is not
sequential with the
previous page fed.
n/a
Sheet set contains
too many sheets.
Indicates machine
has stopped for
"End of Batch."
Barcode Scanning • 5
Solution
• Reposition the barcode
scanner (Refer to
"Adjusting/Positioning
your Barcode Camera.")
• Check paper orientation.
• Confirm paper with
barcode is loaded in right
feeder.
• Add missing page(s).
• Correct sheet sequence.
Add missing sheets and/or
correct your sheet sequence
.
Add missing sheets and/or
correct the sheet sequence.
Not used for barcode jobs.
Refer to fold types and
thickness limits in this guide.
Operator can manually sort
envelopes in stacker.
Check the sheet and insert
feeder settings for the job
before exiting setup mode.
5-11